DIRECTIONS FOR USE
Drain all spray equipment and wash the outside of the spray equipment Use Label rate of TANK CLEANER
Rinse or pressure clean inside of all equipment Use water equal to 1/10 of tank volume
Half fill spray tank with clean water and add the total tank label rate of TANK CLEANER Agitate and flush all equipment for a few seconds. Close boom valves and replace bungs. Stop flow and completely fill tank with water. See label for detailed directions for use Allow to stand 15mins to 24 hours depending on previous spray content
Clean all other components such as nozzles, non-drip diaphragms, screens and filters Clean separately with a fresh solution of TANK CLEANER and water at the rate of 25mL in 10L
Do a final clean water rinse Rinse everything with water After completing the rest of the clean
USAGE RATE
| Spraytank size | Product |
|---|---|
| 500L | 1.25L |
| 1000L | 2.5L |
| 2000L | 5L |
| 3000L | 7.5L |
| 4000L | 10L |
| Cleaning and Decontaminatin of Spray equipment | 250mL/100L |
| Nozzles, non-drip diaphragms, screens and filters | 25mL/10L |
NOTE: For extra ‘sticky’ combinations (e.g. carfentrazoneethyl/glyphosate, Valor®/glyphosate etc) the cleaning solution should remain in contact with all internal surfaces of the spray equipment for at least 24 hours to increase product residue removal.
The information provided herein may include extracts from the product label and does not constitute the complete directions for use. READ THE PRODUCT LABEL THOROUGHLY BEFORE OPENING OR USING TANK CLEANER